B0104
Low Severity (Level 2)Sensor Cleaning Air Blower Actuator A Control Relay
B0104 usually means sensor Cleaning Air Blower Actuator A Control Relay.
Can you still drive with B0104?
⚠️Short-distance driving is usually OK, but have this diagnosed within a week to prevent further damage.
Typical repair cost: $50 – $800
Severity Level 2 — Low
This code indicates a minor issue that is unlikely to cause immediate driveability problems. You can typically continue driving but should have the vehicle inspected at your earliest convenience.
Common Symptoms
- Blower motor not working or only working on certain speeds
- A/C or heat output inconsistent — temperature won't adjust
- Diagnostic trouble code (DTC) stored in module memory
- Fault may be intermittent — code may clear itself and reappear
- Reduced vehicle functionality related to the climate control / HVAC system
Possible Causes
- Faulty blower motor — most common cause, test before replacing
- Damaged or corroded wiring/connector in the climate control / HVAC system circuit
- Blown fuse or faulty relay for the climate control / HVAC system
- Poor ground connection — check and clean all related ground points
- Control module fault — rare but possible, only consider after ruling out simpler causes
Common Fixes
- Scan vehicle with a professional-grade OBD2 scanner to read all stored codes and freeze frame data — note the conditions when the code set ($18-126 at shop, free at auto parts store for basic scan)
- Visually inspect the climate control / HVAC system wiring harness and connectors — look for chafed wires, melted insulation, green corrosion, loose pins, or rodent damage (often free to check yourself, $53 diagnostic fee at shop)
- Replace blower motor if testing confirms it has failed — use OEM quality, avoid the cheapest no-name aftermarket parts that fail in a year ($50-800)
- Check and replace any blown fuses in the climate control / HVAC system fuse circuit — if fuse blows again, there's still a short that needs to be found ($4-11 for fuses)
- Perform a wiggle test on the climate control / HVAC system wiring harness while monitoring live data — see if the fault returns when you move the harness at different points ($0-142 diagnostic labor)
Estimated Repair Cost
These are estimated costs based on generic repair data. Actual costs may vary depending on your vehicle, location, and labor rates.
Frequently Asked Questions
What does B0104 mean?
B0104 stands for "Sensor Cleaning Air Blower Actuator A Control Relay". B0104 usually means sensor Cleaning Air Blower Actuator A Control Relay.
Can you drive with B0104?
Short-distance driving is usually OK, but have this diagnosed within a week to prevent further damage.
How much does it cost to fix B0104?
Repair costs for B0104 typically range from $50 to $800, depending on your vehicle make, model, and local labor rates. Common fixes include: Scan vehicle with a professional-grade OBD2 scanner to read all stored codes and freeze frame data — note the conditions when the code set ($18-126 at shop, free at auto parts store for basic scan); Visually inspect the climate control / HVAC system wiring harness and connectors — look for chafed wires, melted insulation, green corrosion, loose pins, or rodent damage (often free to check yourself, $53 diagnostic fee at shop); Replace blower motor if testing confirms it has failed — use OEM quality, avoid the cheapest no-name aftermarket parts that fail in a year ($50-800).
Will B0104 clear itself?
Explore Repair Costs
Related OBD-II Codes
These codes are in the same range as B0104 and often share similar causes and fixes.
Worried about repair costs?
Get transparent estimates and verify your mechanic's quote before authorizing repairs.
Related Discussions
See what other car owners are saying about this code and related repairs.
View B0104 discussions in the community