B012B
Serious Severity (Level 4)DC/AC Converter A High Voltage Power Outlet “E” Circuit/Open
B012B usually means dC/AC Converter A High Voltage Power Outlet “E” Circuit/Open.
Can you still drive with B012B?
⚠️Limited driving — get to a repair shop within 1–2 days. Avoid long trips and highway speeds.
Typical repair cost: $100 – $2000
Severity Level 4 — Serious
This code indicates a serious issue that can cause noticeable driveability problems and potential engine damage if not addressed. The vehicle should be taken to a mechanic as soon as possible. Extended driving is not recommended.
Common Symptoms
- Airbag/SRS warning light on — airbags may be disabled
- Check Engine Light illuminated
- Seat belt pretensioner may not deploy in a collision
- Diagnostic trouble code (DTC) stored in module memory
Possible Causes
- Faulty airbag module or impact sensor — most common cause, test before replacing
- Damaged or corroded wiring/connector in the airbag/SRS (supplemental restraint) system circuit
- Blown fuse or faulty relay for the airbag/SRS (supplemental restraint) system
- Poor ground connection — check and clean all related ground points
- Control module fault — rare but possible, only consider after ruling out simpler causes
Common Fixes
- Scan vehicle with a professional-grade OBD2 scanner to read all stored codes and freeze frame data — note the conditions when the code set ($22-96 at shop, free at auto parts store for basic scan)
- Visually inspect the airbag/SRS (supplemental restraint) system wiring harness and connectors — look for chafed wires, melted insulation, green corrosion, loose pins, or rodent damage (often free to check yourself, $73 diagnostic fee at shop)
- WARNING: Airbag/SRS system work should be performed by a qualified professional. Disconnect battery for 15+ minutes before any SRS work. Replace faulty component and clear SRS codes with professional tool ($227-1487 at qualified shop)
- Replace airbag module or impact sensor if testing confirms it has failed — use OEM quality, avoid the cheapest no-name aftermarket parts that fail in a year ($100-2000)
- Check and replace any blown fuses in the airbag/SRS (supplemental restraint) system fuse circuit — if fuse blows again, there's still a short that needs to be found ($1-14 for fuses)
Estimated Repair Cost
These are estimated costs based on generic repair data. Actual costs may vary depending on your vehicle, location, and labor rates.
Frequently Asked Questions
What does B012B mean?
B012B stands for "DC/AC Converter A High Voltage Power Outlet “E” Circuit/Open". B012B usually means dC/AC Converter A High Voltage Power Outlet “E” Circuit/Open.
Can you drive with B012B?
Limited driving — get to a repair shop within 1–2 days. Avoid long trips and highway speeds.
How much does it cost to fix B012B?
Repair costs for B012B typically range from $100 to $2000, depending on your vehicle make, model, and local labor rates. Common fixes include: Scan vehicle with a professional-grade OBD2 scanner to read all stored codes and freeze frame data — note the conditions when the code set ($22-96 at shop, free at auto parts store for basic scan); Visually inspect the airbag/SRS (supplemental restraint) system wiring harness and connectors — look for chafed wires, melted insulation, green corrosion, loose pins, or rodent damage (often free to check yourself, $73 diagnostic fee at shop); WARNING: Airbag/SRS system work should be performed by a qualified professional. Disconnect battery for 15+ minutes before any SRS work. Replace faulty component and clear SRS codes with professional tool ($227-1487 at qualified shop).
Will B012B clear itself?
Related Repair Costs
Explore Repair Costs
Related OBD-II Codes
These codes are in the same range as B012B and often share similar causes and fixes.
Worried about repair costs?
Get transparent estimates and verify your mechanic's quote before authorizing repairs.
Related Discussions
See what other car owners are saying about this code and related repairs.
View B012B discussions in the community