B1363
Moderate Severity (Level 3)Ignition Start Circuit Failure
B1363 usually means ignition Start Circuit Failure.
Can you still drive with B1363?
⚠️Short-distance driving is usually OK, but have this diagnosed within a week to prevent further damage.
Typical repair cost: $100 – $600
Severity Level 3 — Moderate
This code indicates a moderate issue that may affect vehicle performance and fuel economy. Continued driving is possible in most cases, but prompt diagnosis and repair are recommended to prevent further damage.
Common Symptoms
- Check Engine Light illuminated
- Ignition not functioning as expected
- Warning light or message on dashboard related to the ignition system
- Diagnostic trouble code (DTC) stored in module memory
Possible Causes
- Failed ignition module/switch — internal fault from age, heat cycling, and vibration
- Damaged wiring or corroded connector in the ignition system circuit
- Blown fuse for the ignition system circuit — check before replacing components
- Faulty control module driving the ignition module/switch
- Loose or corroded ground point shared by the ignition system
Common Fixes
- Scan vehicle with a professional-grade OBD2 scanner to read all stored codes and freeze frame data — note the conditions when the code set ($43-119 at shop, free at auto parts store for basic scan)
- Visually inspect the ignition system wiring harness and connectors — look for chafed wires, melted insulation, green corrosion, loose pins, or rodent damage (often free to check yourself, $75 diagnostic fee at shop)
- Replace ignition module/switch if testing confirms it has failed — use OEM quality, avoid the cheapest no-name aftermarket parts that fail in a year ($100-600)
- Check and replace any blown fuses in the ignition system fuse circuit — if fuse blows again, there's still a short that needs to be found ($1-19 for fuses)
- Perform a wiggle test on the ignition system wiring harness while monitoring live data — see if the fault returns when you move the harness at different points ($0-131 diagnostic labor)
Estimated Repair Cost
These are estimated costs based on generic repair data. Actual costs may vary depending on your vehicle, location, and labor rates.
Frequently Asked Questions
What does B1363 mean?
B1363 stands for "Ignition Start Circuit Failure". B1363 usually means ignition Start Circuit Failure.
Can you drive with B1363?
Short-distance driving is usually OK, but have this diagnosed within a week to prevent further damage.
How much does it cost to fix B1363?
Repair costs for B1363 typically range from $100 to $600, depending on your vehicle make, model, and local labor rates. Common fixes include: Scan vehicle with a professional-grade OBD2 scanner to read all stored codes and freeze frame data — note the conditions when the code set ($43-119 at shop, free at auto parts store for basic scan); Visually inspect the ignition system wiring harness and connectors — look for chafed wires, melted insulation, green corrosion, loose pins, or rodent damage (often free to check yourself, $75 diagnostic fee at shop); Replace ignition module/switch if testing confirms it has failed — use OEM quality, avoid the cheapest no-name aftermarket parts that fail in a year ($100-600).
Will B1363 clear itself?
Explore Repair Costs
Related OBD-II Codes
These codes are in the same range as B1363 and often share similar causes and fixes.
Worried about repair costs?
Get transparent estimates and verify your mechanic's quote before authorizing repairs.
Related Discussions
See what other car owners are saying about this code and related repairs.
View B1363 discussions in the community