B1555
Moderate Severity (Level 3)Ignition Run/Start Circuit Failure
B1555 usually means ignition Run/Start Circuit Failure.
Can you still drive with B1555?
⚠️Short-distance driving is usually OK, but have this diagnosed within a week to prevent further damage.
Typical repair cost: $100 – $600
Severity Level 3 — Moderate
This code indicates a moderate issue that may affect vehicle performance and fuel economy. Continued driving is possible in most cases, but prompt diagnosis and repair are recommended to prevent further damage.
Common Symptoms
- Check Engine Light illuminated
- Warning light or message on dashboard related to the ignition system
- Ignition not functioning as expected
- Diagnostic trouble code (DTC) stored in module memory
Possible Causes
- Failed ignition module/switch — internal fault from age, heat cycling, and vibration
- Damaged wiring or corroded connector in the ignition system circuit
- Blown fuse for the ignition system circuit — check before replacing components
- Faulty control module driving the ignition module/switch
- Loose or corroded ground point shared by the ignition system
Common Fixes
- Scan vehicle with a professional-grade OBD2 scanner to read all stored codes and freeze frame data — note the conditions when the code set ($50-81 at shop, free at auto parts store for basic scan)
- Visually inspect the ignition system wiring harness and connectors — look for chafed wires, melted insulation, green corrosion, loose pins, or rodent damage (often free to check yourself, $107 diagnostic fee at shop)
- Replace ignition module/switch if testing confirms it has failed — use OEM quality, avoid the cheapest no-name aftermarket parts that fail in a year ($100-600)
- Check and replace any blown fuses in the ignition system fuse circuit — if fuse blows again, there's still a short that needs to be found ($5-10 for fuses)
- Perform a wiggle test on the ignition system wiring harness while monitoring live data — see if the fault returns when you move the harness at different points ($0-122 diagnostic labor)
Estimated Repair Cost
These are estimated costs based on generic repair data. Actual costs may vary depending on your vehicle, location, and labor rates.
Frequently Asked Questions
What does B1555 mean?
B1555 stands for "Ignition Run/Start Circuit Failure". B1555 usually means ignition Run/Start Circuit Failure.
Can you drive with B1555?
Short-distance driving is usually OK, but have this diagnosed within a week to prevent further damage.
How much does it cost to fix B1555?
Repair costs for B1555 typically range from $100 to $600, depending on your vehicle make, model, and local labor rates. Common fixes include: Scan vehicle with a professional-grade OBD2 scanner to read all stored codes and freeze frame data — note the conditions when the code set ($50-81 at shop, free at auto parts store for basic scan); Visually inspect the ignition system wiring harness and connectors — look for chafed wires, melted insulation, green corrosion, loose pins, or rodent damage (often free to check yourself, $107 diagnostic fee at shop); Replace ignition module/switch if testing confirms it has failed — use OEM quality, avoid the cheapest no-name aftermarket parts that fail in a year ($100-600).
Will B1555 clear itself?
Explore Repair Costs
Related OBD-II Codes
These codes are in the same range as B1555 and often share similar causes and fixes.
Worried about repair costs?
Get transparent estimates and verify your mechanic's quote before authorizing repairs.
Related Discussions
See what other car owners are saying about this code and related repairs.
View B1555 discussions in the community