B1626
Moderate Severity (Level 3)Lamp Keypad Output Short Circuit To Ground
B1626 usually means lamp Keypad Output Short Circuit To Ground.
Can you still drive with B1626?
⚠️Short-distance driving is usually OK, but have this diagnosed within a week to prevent further damage.
Typical repair cost: $100 – $800
Severity Level 3 — Moderate
This code indicates a moderate issue that may affect vehicle performance and fuel economy. Continued driving is possible in most cases, but prompt diagnosis and repair are recommended to prevent further damage.
Common Symptoms
- Security light flashing — vehicle may not start
- Alarm going off randomly or not arming
- Engine cranks but won't start — immobilizer preventing start
- Diagnostic trouble code (DTC) stored in module memory
Possible Causes
- Faulty immobilizer antenna — most common cause, test before replacing
- Damaged or corroded wiring/connector in the key/immobilizer system circuit
- Blown fuse or faulty relay for the key/immobilizer system
- Poor ground connection — check and clean all related ground points
- Control module fault — rare but possible, only consider after ruling out simpler causes
Common Fixes
- Scan vehicle with a professional-grade OBD2 scanner to read all stored codes and freeze frame data — note the conditions when the code set ($25-147 at shop, free at auto parts store for basic scan)
- Visually inspect the key/immobilizer system wiring harness and connectors — look for chafed wires, melted insulation, green corrosion, loose pins, or rodent damage (often free to check yourself, $139 diagnostic fee at shop)
- If the engine cranks but won't start, check the security/immobilizer light — if flashing, try a different key. Key programming may be needed ($136-384 at dealer or locksmith)
- Replace immobilizer antenna if testing confirms it has failed — use OEM quality, avoid the cheapest no-name aftermarket parts that fail in a year ($100-800)
- Check and replace any blown fuses in the key/immobilizer system fuse circuit — if fuse blows again, there's still a short that needs to be found ($1-12 for fuses)
Estimated Repair Cost
These are estimated costs based on generic repair data. Actual costs may vary depending on your vehicle, location, and labor rates.
Frequently Asked Questions
What does B1626 mean?
B1626 stands for "Lamp Keypad Output Short Circuit To Ground". B1626 usually means lamp Keypad Output Short Circuit To Ground.
Can you drive with B1626?
Short-distance driving is usually OK, but have this diagnosed within a week to prevent further damage.
How much does it cost to fix B1626?
Repair costs for B1626 typically range from $100 to $800, depending on your vehicle make, model, and local labor rates. Common fixes include: Scan vehicle with a professional-grade OBD2 scanner to read all stored codes and freeze frame data — note the conditions when the code set ($25-147 at shop, free at auto parts store for basic scan); Visually inspect the key/immobilizer system wiring harness and connectors — look for chafed wires, melted insulation, green corrosion, loose pins, or rodent damage (often free to check yourself, $139 diagnostic fee at shop); If the engine cranks but won't start, check the security/immobilizer light — if flashing, try a different key. Key programming may be needed ($136-384 at dealer or locksmith).
Will B1626 clear itself?
Explore Repair Costs
Related OBD-II Codes
These codes are in the same range as B1626 and often share similar causes and fixes.
Worried about repair costs?
Get transparent estimates and verify your mechanic's quote before authorizing repairs.
Related Discussions
See what other car owners are saying about this code and related repairs.
View B1626 discussions in the community