B1725
Low Severity (Level 1)Seat Driver Rear Up Switch Circuit Failure
B1725 usually means seat Driver Rear Up Switch Circuit Failure.
Can you still drive with B1725?
✅Safe to drive — this is an informational or minor issue. Schedule diagnosis at your convenience.
Typical repair cost: $100 – $800
Severity Level 1 — Low
This code indicates a minor issue that is unlikely to cause immediate driveability problems. You can typically continue driving but should have the vehicle inspected at your earliest convenience.
Common Symptoms
- Warning light or message on dashboard related to the power seat system
- Power seat won't move in one or more directions
- Seat memory settings not saving or recalling correctly
- Diagnostic trouble code (DTC) stored in module memory
Possible Causes
- Failed seat motor/module — internal fault from age, heat cycling, and vibration
- Damaged wiring or corroded connector in the power seat system circuit
- Blown fuse for the power seat system circuit — check before replacing components
- Faulty control module driving the seat motor/module
- Loose or corroded ground point shared by the power seat system
Common Fixes
- Scan vehicle with a professional-grade OBD2 scanner to read all stored codes and freeze frame data — note the conditions when the code set ($7-95 at shop, free at auto parts store for basic scan)
- Visually inspect the power seat system wiring harness and connectors — look for chafed wires, melted insulation, green corrosion, loose pins, or rodent damage (often free to check yourself, $61 diagnostic fee at shop)
- Replace seat motor/module if testing confirms it has failed — use OEM quality, avoid the cheapest no-name aftermarket parts that fail in a year ($100-800)
- Check and replace any blown fuses in the power seat system fuse circuit — if fuse blows again, there's still a short that needs to be found ($3-16 for fuses)
- Perform a wiggle test on the power seat system wiring harness while monitoring live data — see if the fault returns when you move the harness at different points ($0-108 diagnostic labor)
Estimated Repair Cost
These are estimated costs based on generic repair data. Actual costs may vary depending on your vehicle, location, and labor rates.
Frequently Asked Questions
What does B1725 mean?
B1725 stands for "Seat Driver Rear Up Switch Circuit Failure". B1725 usually means seat Driver Rear Up Switch Circuit Failure.
Can you drive with B1725?
Safe to drive — this is an informational or minor issue. Schedule diagnosis at your convenience.
How much does it cost to fix B1725?
Repair costs for B1725 typically range from $100 to $800, depending on your vehicle make, model, and local labor rates. Common fixes include: Scan vehicle with a professional-grade OBD2 scanner to read all stored codes and freeze frame data — note the conditions when the code set ($7-95 at shop, free at auto parts store for basic scan); Visually inspect the power seat system wiring harness and connectors — look for chafed wires, melted insulation, green corrosion, loose pins, or rodent damage (often free to check yourself, $61 diagnostic fee at shop); Replace seat motor/module if testing confirms it has failed — use OEM quality, avoid the cheapest no-name aftermarket parts that fail in a year ($100-800).
Will B1725 clear itself?
Explore Repair Costs
Related OBD-II Codes
These codes are in the same range as B1725 and often share similar causes and fixes.
Worried about repair costs?
Get transparent estimates and verify your mechanic's quote before authorizing repairs.
Related Discussions
See what other car owners are saying about this code and related repairs.
View B1725 discussions in the community