B1798
Low Severity (Level 1)Lamp Turn Signal Front Output Circuit Failure
B1798 usually means lamp Turn Signal Front Output Circuit Failure.
Can you still drive with B1798?
✅Safe to drive — this is an informational or minor issue. Schedule diagnosis at your convenience.
Typical repair cost: $10 – $200
Severity Level 1 — Low
This code indicates a minor issue that is unlikely to cause immediate driveability problems. You can typically continue driving but should have the vehicle inspected at your earliest convenience.
Common Symptoms
- Warning light or message on dashboard related to the turn signal/hazard system
- Turn signals not functioning as expected
- Diagnostic trouble code (DTC) stored in module memory
- Fault may be intermittent — code may clear itself and reappear
- Reduced vehicle functionality related to the turn signal/hazard system
Possible Causes
- Failed turn signal flasher — internal fault from age, heat cycling, and vibration
- Damaged wiring or corroded connector in the turn signal/hazard system circuit
- Blown fuse for the turn signal/hazard system circuit — check before replacing components
- Faulty control module driving the turn signal flasher
- Loose or corroded ground point shared by the turn signal/hazard system
Common Fixes
- Scan vehicle with a professional-grade OBD2 scanner to read all stored codes and freeze frame data — note the conditions when the code set ($40-117 at shop, free at auto parts store for basic scan)
- Visually inspect the turn signal/hazard system wiring harness and connectors — look for chafed wires, melted insulation, green corrosion, loose pins, or rodent damage (often free to check yourself, $150 diagnostic fee at shop)
- Replace turn signal flasher if testing confirms it has failed — use OEM quality, avoid the cheapest no-name aftermarket parts that fail in a year ($10-200)
- Check and replace any blown fuses in the turn signal/hazard system fuse circuit — if fuse blows again, there's still a short that needs to be found ($5-15 for fuses)
- Perform a wiggle test on the turn signal/hazard system wiring harness while monitoring live data — see if the fault returns when you move the harness at different points ($0-150 diagnostic labor)
Estimated Repair Cost
These are estimated costs based on generic repair data. Actual costs may vary depending on your vehicle, location, and labor rates.
Frequently Asked Questions
What does B1798 mean?
B1798 stands for "Lamp Turn Signal Front Output Circuit Failure". B1798 usually means lamp Turn Signal Front Output Circuit Failure.
Can you drive with B1798?
Safe to drive — this is an informational or minor issue. Schedule diagnosis at your convenience.
How much does it cost to fix B1798?
Repair costs for B1798 typically range from $10 to $200, depending on your vehicle make, model, and local labor rates. Common fixes include: Scan vehicle with a professional-grade OBD2 scanner to read all stored codes and freeze frame data — note the conditions when the code set ($40-117 at shop, free at auto parts store for basic scan); Visually inspect the turn signal/hazard system wiring harness and connectors — look for chafed wires, melted insulation, green corrosion, loose pins, or rodent damage (often free to check yourself, $150 diagnostic fee at shop); Replace turn signal flasher if testing confirms it has failed — use OEM quality, avoid the cheapest no-name aftermarket parts that fail in a year ($10-200).
Will B1798 clear itself?
Explore Repair Costs
Related OBD-II Codes
These codes are in the same range as B1798 and often share similar causes and fixes.
Worried about repair costs?
Get transparent estimates and verify your mechanic's quote before authorizing repairs.
Related Discussions
See what other car owners are saying about this code and related repairs.
View B1798 discussions in the community