B2134
Low Severity (Level 2)Brake Motor Warning lamp Circuit Short to Vbatt
B2134 usually means brake Motor Warning lamp Circuit Short to Vbatt.
Can you still drive with B2134?
⚠️Short-distance driving is usually OK, but have this diagnosed within a week to prevent further damage.
Typical repair cost: $20 – $200
Severity Level 2 — Low
This code indicates a minor issue that is unlikely to cause immediate driveability problems. You can typically continue driving but should have the vehicle inspected at your earliest convenience.
Common Symptoms
- The brake light switch/circuit is not operating as designed
- Warning light or malfunction indicator related to the brake light switch/circuit is illuminated
- Diagnostic trouble code (DTC) stored in module memory
- Fault may be intermittent — code may clear itself and reappear
- Reduced vehicle functionality related to the brake light switch/circuit
Possible Causes
- Faulty brake light switch — most common cause, test before replacing
- Damaged or corroded wiring/connector in the brake light switch/circuit circuit
- Blown fuse or faulty relay for the brake light switch/circuit
- Poor ground connection — check and clean all related ground points
- Control module fault — rare but possible, only consider after ruling out simpler causes
Common Fixes
- Scan vehicle with a professional-grade OBD2 scanner to read all stored codes and freeze frame data — note the conditions when the code set ($27-90 at shop, free at auto parts store for basic scan)
- Visually inspect the brake light switch/circuit wiring harness and connectors — look for chafed wires, melted insulation, green corrosion, loose pins, or rodent damage (often free to check yourself, $124 diagnostic fee at shop)
- Replace brake light switch if testing confirms it has failed — use OEM quality, avoid the cheapest no-name aftermarket parts that fail in a year ($15-150)
- Check and replace any blown fuses in the brake light switch/circuit fuse circuit — if fuse blows again, there's still a short that needs to be found ($2-16 for fuses)
- Perform a wiggle test on the brake light switch/circuit wiring harness while monitoring live data — see if the fault returns when you move the harness at different points ($0-128 diagnostic labor)
Estimated Repair Cost
These are estimated costs based on generic repair data. Actual costs may vary depending on your vehicle, location, and labor rates.
Frequently Asked Questions
What does B2134 mean?
B2134 stands for "Brake Motor Warning lamp Circuit Short to Vbatt". B2134 usually means brake Motor Warning lamp Circuit Short to Vbatt.
Can you drive with B2134?
Short-distance driving is usually OK, but have this diagnosed within a week to prevent further damage.
How much does it cost to fix B2134?
Repair costs for B2134 typically range from $20 to $200, depending on your vehicle make, model, and local labor rates. Common fixes include: Scan vehicle with a professional-grade OBD2 scanner to read all stored codes and freeze frame data — note the conditions when the code set ($27-90 at shop, free at auto parts store for basic scan); Visually inspect the brake light switch/circuit wiring harness and connectors — look for chafed wires, melted insulation, green corrosion, loose pins, or rodent damage (often free to check yourself, $124 diagnostic fee at shop); Replace brake light switch if testing confirms it has failed — use OEM quality, avoid the cheapest no-name aftermarket parts that fail in a year ($15-150).
Will B2134 clear itself?
Related Repair Costs
Explore Repair Costs
Related OBD-II Codes
These codes are in the same range as B2134 and often share similar causes and fixes.
Worried about repair costs?
Get transparent estimates and verify your mechanic's quote before authorizing repairs.
Related Discussions
See what other car owners are saying about this code and related repairs.
View B2134 discussions in the community