B2516
Low Severity (Level 2)Blower Control Circuit Failure
B2516 usually means blower Control Circuit Failure.
Can you still drive with B2516?
⚠️Short-distance driving is usually OK, but have this diagnosed within a week to prevent further damage.
Typical repair cost: $50 – $800
Severity Level 2 — Low
This code indicates a minor issue that is unlikely to cause immediate driveability problems. You can typically continue driving but should have the vehicle inspected at your earliest convenience.
Common Symptoms
- A/C or heat output inconsistent — temperature won't adjust
- Blower motor not working or only working on certain speeds
- Climate control not functioning as expected
- Diagnostic trouble code (DTC) stored in module memory
Possible Causes
- Failed blower motor — internal fault from age, heat cycling, and vibration
- Damaged wiring or corroded connector in the climate control / HVAC system circuit
- Blown fuse for the climate control / HVAC system circuit — check before replacing components
- Faulty control module driving the blower motor
- Loose or corroded ground point shared by the climate control / HVAC system
Common Fixes
- Scan vehicle with a professional-grade OBD2 scanner to read all stored codes and freeze frame data — note the conditions when the code set ($0-110 at shop, free at auto parts store for basic scan)
- Visually inspect the climate control / HVAC system wiring harness and connectors — look for chafed wires, melted insulation, green corrosion, loose pins, or rodent damage (often free to check yourself, $54 diagnostic fee at shop)
- Replace blower motor if testing confirms it has failed — use OEM quality, avoid the cheapest no-name aftermarket parts that fail in a year ($50-800)
- Check and replace any blown fuses in the climate control / HVAC system fuse circuit — if fuse blows again, there's still a short that needs to be found ($1-16 for fuses)
- Perform a wiggle test on the climate control / HVAC system wiring harness while monitoring live data — see if the fault returns when you move the harness at different points ($0-121 diagnostic labor)
Estimated Repair Cost
These are estimated costs based on generic repair data. Actual costs may vary depending on your vehicle, location, and labor rates.
Frequently Asked Questions
What does B2516 mean?
B2516 stands for "Blower Control Circuit Failure". B2516 usually means blower Control Circuit Failure.
Can you drive with B2516?
Short-distance driving is usually OK, but have this diagnosed within a week to prevent further damage.
How much does it cost to fix B2516?
Repair costs for B2516 typically range from $50 to $800, depending on your vehicle make, model, and local labor rates. Common fixes include: Scan vehicle with a professional-grade OBD2 scanner to read all stored codes and freeze frame data — note the conditions when the code set ($0-110 at shop, free at auto parts store for basic scan); Visually inspect the climate control / HVAC system wiring harness and connectors — look for chafed wires, melted insulation, green corrosion, loose pins, or rodent damage (often free to check yourself, $54 diagnostic fee at shop); Replace blower motor if testing confirms it has failed — use OEM quality, avoid the cheapest no-name aftermarket parts that fail in a year ($50-800).
Will B2516 clear itself?
Explore Repair Costs
Related OBD-II Codes
These codes are in the same range as B2516 and often share similar causes and fixes.
Worried about repair costs?
Get transparent estimates and verify your mechanic's quote before authorizing repairs.
Related Discussions
See what other car owners are saying about this code and related repairs.
View B2516 discussions in the community