B2606
Low Severity (Level 2)A/C Temperature Sensor Out of Range
B2606 usually means a/C Temperature Sensor Out of Range.
Can you still drive with B2606?
⚠️Short-distance driving is usually OK, but have this diagnosed within a week to prevent further damage.
Typical repair cost: $50 – $800
Severity Level 2 — Low
This code indicates a minor issue that is unlikely to cause immediate driveability problems. You can typically continue driving but should have the vehicle inspected at your earliest convenience.
Common Symptoms
- Climate control behaving erratically or inconsistently
- Climate control working sometimes, failing other times
- A/C or heat output inconsistent — temperature won't adjust
- Diagnostic trouble code (DTC) stored in module memory
Possible Causes
- Blower motor failing — output signal drifts outside expected range, common with age (80k-120k miles)
- Wiring or connector with intermittent high resistance — causes signal to fluctuate, especially with temperature or vibration
- Mechanical issue with the climate control / HVAC system causing the sensor/actuator to operate outside its designed range
- Contamination or debris affecting blower motor operation — dirt, oil, or moisture interfering with readings
- Software/calibration issue in the control module — may need reprogramming rather than parts replacement
Common Fixes
- Scan vehicle with a professional-grade OBD2 scanner to read all stored codes and freeze frame data — note the conditions when the code set ($19-129 at shop, free at auto parts store for basic scan)
- Visually inspect the climate control / HVAC system wiring harness and connectors — look for chafed wires, melted insulation, green corrosion, loose pins, or rodent damage (often free to check yourself, $70 diagnostic fee at shop)
- Replace blower motor — slow degradation over time is the most common cause of range/performance codes, especially on vehicles with 100k+ miles ($50-800)
- Check for vacuum leaks, exhaust leaks, or mechanical issues that could be causing the climate control / HVAC system to see out-of-range conditions ($127 diagnostic smoke test + repair)
- Update control module software/firmware — some range/performance codes are fixed by a PCM reflash from the dealer ($87 at dealer)
Estimated Repair Cost
These are estimated costs based on generic repair data. Actual costs may vary depending on your vehicle, location, and labor rates.
Frequently Asked Questions
What does B2606 mean?
B2606 stands for "A/C Temperature Sensor Out of Range". B2606 usually means a/C Temperature Sensor Out of Range.
Can you drive with B2606?
Short-distance driving is usually OK, but have this diagnosed within a week to prevent further damage.
How much does it cost to fix B2606?
Repair costs for B2606 typically range from $50 to $800, depending on your vehicle make, model, and local labor rates. Common fixes include: Scan vehicle with a professional-grade OBD2 scanner to read all stored codes and freeze frame data — note the conditions when the code set ($19-129 at shop, free at auto parts store for basic scan); Visually inspect the climate control / HVAC system wiring harness and connectors — look for chafed wires, melted insulation, green corrosion, loose pins, or rodent damage (often free to check yourself, $70 diagnostic fee at shop); Replace blower motor — slow degradation over time is the most common cause of range/performance codes, especially on vehicles with 100k+ miles ($50-800).
Will B2606 clear itself?
Related Repair Costs
Explore Repair Costs
Related OBD-II Codes
These codes are in the same range as B2606 and often share similar causes and fixes.
Worried about repair costs?
Get transparent estimates and verify your mechanic's quote before authorizing repairs.
Related Discussions
See what other car owners are saying about this code and related repairs.
View B2606 discussions in the community