P2E2B
Moderate Severity (Level 3)Drive Motor A Excitation Current Too High
P2E2B usually means drive Motor A Excitation Current Too High.
Can you still drive with P2E2B?
⚠️Short-distance driving is usually OK, but have this diagnosed within a week to prevent further damage.
Typical repair cost: $80 – $1200
Severity Level 3 — Moderate
This code indicates a moderate issue that may affect vehicle performance and fuel economy. Continued driving is possible in most cases, but prompt diagnosis and repair are recommended to prevent further damage.
Common Symptoms
- Check Engine Light illuminated
- Warning light or malfunction indicator related to the powertrain/engine system is illuminated
- The powertrain/engine system is not operating as designed
- Diagnostic trouble code (DTC) stored in module memory
Possible Causes
- Faulty engine sensor or actuator — most common cause, test before replacing
- Damaged or corroded wiring/connector in the powertrain/engine system circuit
- Blown fuse or faulty relay for the powertrain/engine system
- Poor ground connection — check and clean all related ground points
- Control module fault — rare but possible, only consider after ruling out simpler causes
Common Fixes
- Scan vehicle with a professional-grade OBD2 scanner to read all stored codes and freeze frame data — note the conditions when the code set ($38-140 at shop, free at auto parts store for basic scan)
- Visually inspect the powertrain/engine system wiring harness and connectors — look for chafed wires, melted insulation, green corrosion, loose pins, or rodent damage (often free to check yourself, $90 diagnostic fee at shop)
- Replace engine sensor or actuator if testing confirms it has failed — use OEM quality, avoid the cheapest no-name aftermarket parts that fail in a year ($80-1200)
- Check and replace any blown fuses in the powertrain/engine system fuse circuit — if fuse blows again, there's still a short that needs to be found ($1-12 for fuses)
- Perform a wiggle test on the powertrain/engine system wiring harness while monitoring live data — see if the fault returns when you move the harness at different points ($0-114 diagnostic labor)
Estimated Repair Cost
These are estimated costs based on generic repair data. Actual costs may vary depending on your vehicle, location, and labor rates.
Frequently Asked Questions
What does P2E2B mean?
P2E2B stands for "Drive Motor A Excitation Current Too High". P2E2B usually means drive Motor A Excitation Current Too High.
Can you drive with P2E2B?
Short-distance driving is usually OK, but have this diagnosed within a week to prevent further damage.
How much does it cost to fix P2E2B?
Repair costs for P2E2B typically range from $80 to $1200, depending on your vehicle make, model, and local labor rates. Common fixes include: Scan vehicle with a professional-grade OBD2 scanner to read all stored codes and freeze frame data — note the conditions when the code set ($38-140 at shop, free at auto parts store for basic scan); Visually inspect the powertrain/engine system wiring harness and connectors — look for chafed wires, melted insulation, green corrosion, loose pins, or rodent damage (often free to check yourself, $90 diagnostic fee at shop); Replace engine sensor or actuator if testing confirms it has failed — use OEM quality, avoid the cheapest no-name aftermarket parts that fail in a year ($80-1200).
Will P2E2B clear itself?
Explore Repair Costs
Related OBD-II Codes
These codes are in the same range as P2E2B and often share similar causes and fixes.
Worried about repair costs?
Get transparent estimates and verify your mechanic's quote before authorizing repairs.
Related Discussions
See what other car owners are saying about this code and related repairs.
View P2E2B discussions in the community