P2E3A
Low Severity (Level 2)Battery Charger B Output Voltage Performance
P2E3A usually means battery Charger B Output Voltage Performance.
Can you still drive with P2E3A?
⚠️Short-distance driving is usually OK, but have this diagnosed within a week to prevent further damage.
Typical repair cost: $100 – $500
Severity Level 2 — Low
This code indicates a minor issue that is unlikely to cause immediate driveability problems. You can typically continue driving but should have the vehicle inspected at your earliest convenience.
Common Symptoms
- The battery voltage/system voltage is not operating as designed
- Warning light or malfunction indicator related to the battery voltage/system voltage is illuminated
- Diagnostic trouble code (DTC) stored in module memory
- Fault may be intermittent — code may clear itself and reappear
- Reduced vehicle functionality related to the battery voltage/system voltage
Possible Causes
- Faulty battery — most common cause, test before replacing
- Damaged or corroded wiring/connector in the battery voltage/system voltage circuit
- Blown fuse or faulty relay for the battery voltage/system voltage
- Poor ground connection — check and clean all related ground points
- Control module fault — rare but possible, only consider after ruling out simpler causes
Common Fixes
- Scan vehicle with a professional-grade OBD2 scanner to read all stored codes and freeze frame data — note the conditions when the code set ($14-126 at shop, free at auto parts store for basic scan)
- Visually inspect the battery voltage/system voltage wiring harness and connectors — look for chafed wires, melted insulation, green corrosion, loose pins, or rodent damage (often free to check yourself, $119 diagnostic fee at shop)
- Replace battery if testing confirms it has failed — use OEM quality, avoid the cheapest no-name aftermarket parts that fail in a year ($100-500)
- Check and replace any blown fuses in the battery voltage/system voltage fuse circuit — if fuse blows again, there's still a short that needs to be found ($2-12 for fuses)
- Perform a wiggle test on the battery voltage/system voltage wiring harness while monitoring live data — see if the fault returns when you move the harness at different points ($0-136 diagnostic labor)
Estimated Repair Cost
These are estimated costs based on generic repair data. Actual costs may vary depending on your vehicle, location, and labor rates.
Frequently Asked Questions
What does P2E3A mean?
P2E3A stands for "Battery Charger B Output Voltage Performance". P2E3A usually means battery Charger B Output Voltage Performance.
Can you drive with P2E3A?
Short-distance driving is usually OK, but have this diagnosed within a week to prevent further damage.
How much does it cost to fix P2E3A?
Repair costs for P2E3A typically range from $100 to $500, depending on your vehicle make, model, and local labor rates. Common fixes include: Scan vehicle with a professional-grade OBD2 scanner to read all stored codes and freeze frame data — note the conditions when the code set ($14-126 at shop, free at auto parts store for basic scan); Visually inspect the battery voltage/system voltage wiring harness and connectors — look for chafed wires, melted insulation, green corrosion, loose pins, or rodent damage (often free to check yourself, $119 diagnostic fee at shop); Replace battery if testing confirms it has failed — use OEM quality, avoid the cheapest no-name aftermarket parts that fail in a year ($100-500).
Will P2E3A clear itself?
Related Repair Costs
Explore Repair Costs
Related OBD-II Codes
These codes are in the same range as P2E3A and often share similar causes and fixes.
Worried about repair costs?
Get transparent estimates and verify your mechanic's quote before authorizing repairs.
Related Discussions
See what other car owners are saying about this code and related repairs.
View P2E3A discussions in the community