P3486
Moderate Severity (Level 3)Cylinder 11 Exhaust Valve Control Circuit Performance
P3486 usually means cylinder 11 Exhaust Valve Control Circuit Performance.
Can you still drive with P3486?
⚠️Short-distance driving is usually OK, but have this diagnosed within a week to prevent further damage.
Typical repair cost: $80 – $1200
Severity Level 3 — Moderate
This code indicates a moderate issue that may affect vehicle performance and fuel economy. Continued driving is possible in most cases, but prompt diagnosis and repair are recommended to prevent further damage.
Common Symptoms
- Check Engine Light illuminated
- The powertrain/engine system is not operating as designed
- Warning light or malfunction indicator related to the powertrain/engine system is illuminated
- Diagnostic trouble code (DTC) stored in module memory
Possible Causes
- Faulty engine sensor or actuator — most common cause, test before replacing
- Damaged or corroded wiring/connector in the powertrain/engine system circuit
- Blown fuse or faulty relay for the powertrain/engine system
- Poor ground connection — check and clean all related ground points
- Control module fault — rare but possible, only consider after ruling out simpler causes
Common Fixes
- Scan vehicle with a professional-grade OBD2 scanner to read all stored codes and freeze frame data — note the conditions when the code set ($24-84 at shop, free at auto parts store for basic scan)
- Visually inspect the powertrain/engine system wiring harness and connectors — look for chafed wires, melted insulation, green corrosion, loose pins, or rodent damage (often free to check yourself, $56 diagnostic fee at shop)
- Replace engine sensor or actuator if testing confirms it has failed — use OEM quality, avoid the cheapest no-name aftermarket parts that fail in a year ($80-1200)
- Check and replace any blown fuses in the powertrain/engine system fuse circuit — if fuse blows again, there's still a short that needs to be found ($4-10 for fuses)
- Perform a wiggle test on the powertrain/engine system wiring harness while monitoring live data — see if the fault returns when you move the harness at different points ($0-102 diagnostic labor)
Estimated Repair Cost
These are estimated costs based on generic repair data. Actual costs may vary depending on your vehicle, location, and labor rates.
Frequently Asked Questions
What does P3486 mean?
P3486 stands for "Cylinder 11 Exhaust Valve Control Circuit Performance". P3486 usually means cylinder 11 Exhaust Valve Control Circuit Performance.
Can you drive with P3486?
Short-distance driving is usually OK, but have this diagnosed within a week to prevent further damage.
How much does it cost to fix P3486?
Repair costs for P3486 typically range from $80 to $1200, depending on your vehicle make, model, and local labor rates. Common fixes include: Scan vehicle with a professional-grade OBD2 scanner to read all stored codes and freeze frame data — note the conditions when the code set ($24-84 at shop, free at auto parts store for basic scan); Visually inspect the powertrain/engine system wiring harness and connectors — look for chafed wires, melted insulation, green corrosion, loose pins, or rodent damage (often free to check yourself, $56 diagnostic fee at shop); Replace engine sensor or actuator if testing confirms it has failed — use OEM quality, avoid the cheapest no-name aftermarket parts that fail in a year ($80-1200).
Will P3486 clear itself?
Related Repair Costs
Explore Repair Costs
Related OBD-II Codes
These codes are in the same range as P3486 and often share similar causes and fixes.
Worried about repair costs?
Get transparent estimates and verify your mechanic's quote before authorizing repairs.
Related Discussions
See what other car owners are saying about this code and related repairs.
View P3486 discussions in the community