P34A9
Serious Severity (Level 4)A Camshaft Position Actuator Temperature Sensor Range/Performance Bank 2
P34A9 usually means a Camshaft Position Actuator Temperature Sensor Range/Performance Bank 2.
Can you still drive with P34A9?
⚠️Limited driving — get to a repair shop within 1–2 days. Avoid long trips and highway speeds.
Typical repair cost: $50 – $400
Severity Level 4 — Serious
This code indicates a serious issue that can cause noticeable driveability problems and potential engine damage if not addressed. The vehicle should be taken to a mechanic as soon as possible. Extended driving is not recommended.
Common Symptoms
- Check Engine Light illuminated
- Engine working sometimes, failing other times
- Engine behaving erratically or inconsistently
- Diagnostic trouble code (DTC) stored in module memory
Possible Causes
- Camshaft position sensor failing — output signal drifts outside expected range, common with age (80k-120k miles)
- Wiring or connector with intermittent high resistance — causes signal to fluctuate, especially with temperature or vibration
- Mechanical issue with the camshaft position sensor causing the sensor/actuator to operate outside its designed range
- Contamination or debris affecting camshaft position sensor operation — dirt, oil, or moisture interfering with readings
- Software/calibration issue in the control module — may need reprogramming rather than parts replacement
Common Fixes
- Scan vehicle with a professional-grade OBD2 scanner to read all stored codes and freeze frame data — note the conditions when the code set ($17-150 at shop, free at auto parts store for basic scan)
- Visually inspect the camshaft position sensor wiring harness and connectors — look for chafed wires, melted insulation, green corrosion, loose pins, or rodent damage (often free to check yourself, $71 diagnostic fee at shop)
- Replace camshaft position sensor — slow degradation over time is the most common cause of range/performance codes, especially on vehicles with 100k+ miles ($50-350)
- Check for vacuum leaks, exhaust leaks, or mechanical issues that could be causing the camshaft position sensor to see out-of-range conditions ($88 diagnostic smoke test + repair)
- Update control module software/firmware — some range/performance codes are fixed by a PCM reflash from the dealer ($97 at dealer)
Estimated Repair Cost
These are estimated costs based on generic repair data. Actual costs may vary depending on your vehicle, location, and labor rates.
Frequently Asked Questions
What does P34A9 mean?
P34A9 stands for "A Camshaft Position Actuator Temperature Sensor Range/Performance Bank 2". P34A9 usually means a Camshaft Position Actuator Temperature Sensor Range/Performance Bank 2.
Can you drive with P34A9?
Limited driving — get to a repair shop within 1–2 days. Avoid long trips and highway speeds.
How much does it cost to fix P34A9?
Repair costs for P34A9 typically range from $50 to $400, depending on your vehicle make, model, and local labor rates. Common fixes include: Scan vehicle with a professional-grade OBD2 scanner to read all stored codes and freeze frame data — note the conditions when the code set ($17-150 at shop, free at auto parts store for basic scan); Visually inspect the camshaft position sensor wiring harness and connectors — look for chafed wires, melted insulation, green corrosion, loose pins, or rodent damage (often free to check yourself, $71 diagnostic fee at shop); Replace camshaft position sensor — slow degradation over time is the most common cause of range/performance codes, especially on vehicles with 100k+ miles ($50-350).
Will P34A9 clear itself?
Related Repair Costs
Explore Repair Costs
Related OBD-II Codes
These codes are in the same range as P34A9 and often share similar causes and fixes.
Worried about repair costs?
Get transparent estimates and verify your mechanic's quote before authorizing repairs.
Related Discussions
See what other car owners are saying about this code and related repairs.
View P34A9 discussions in the community