P34BB
Serious Severity (Level 4)B Camshaft Position Actuator Temperature Sensor Circuit High Bank 2
P34BB usually means b Camshaft Position Actuator Temperature Sensor Circuit High Bank 2.
Can you still drive with P34BB?
⚠️Limited driving — get to a repair shop within 1–2 days. Avoid long trips and highway speeds.
Typical repair cost: $50 – $400
Severity Level 4 — Serious
This code indicates a serious issue that can cause noticeable driveability problems and potential engine damage if not addressed. The vehicle should be taken to a mechanic as soon as possible. Extended driving is not recommended.
Common Symptoms
- Check Engine Light illuminated
- Engine reading abnormally high or staying at maximum
- Engine may run rich or have poor fuel economy (PCM sees faulty signal)
- Diagnostic trouble code (DTC) stored in module memory
Possible Causes
- Failed camshaft position sensor — internal short causing abnormally high voltage signal to the control module
- Wiring shorted to a 5V reference or 12V power wire in the same harness — wires melted together or chafing at a common point
- Poor ground connection for the camshaft position sensor — high resistance in ground path causes voltage to read high
- Faulty voltage regulator or power supply within the sensor
Common Fixes
- Scan vehicle with a professional-grade OBD2 scanner to read all stored codes and freeze frame data — note the conditions when the code set ($23-119 at shop, free at auto parts store for basic scan)
- Visually inspect the camshaft position sensor wiring harness and connectors — look for chafed wires, melted insulation, green corrosion, loose pins, or rodent damage (often free to check yourself, $115 diagnostic fee at shop)
- Test camshaft position sensor with a multimeter at the connector — compare readings to factory service manual specs. If out of spec, replace camshaft position sensor ($50-350)
- Check the reference voltage supply to camshaft position sensor — should be steady 5V (or 12V) — if low, trace back to PCM/BCM voltage regulator ($164-466 if module repair needed)
- Perform a voltage drop test on the ground side of the camshaft position sensor circuit — more than 0.1V drop means a bad ground that must be cleaned/repaired ($51-249 at shop)
Estimated Repair Cost
These are estimated costs based on generic repair data. Actual costs may vary depending on your vehicle, location, and labor rates.
Frequently Asked Questions
What does P34BB mean?
P34BB stands for "B Camshaft Position Actuator Temperature Sensor Circuit High Bank 2". P34BB usually means b Camshaft Position Actuator Temperature Sensor Circuit High Bank 2.
Can you drive with P34BB?
Limited driving — get to a repair shop within 1–2 days. Avoid long trips and highway speeds.
How much does it cost to fix P34BB?
Repair costs for P34BB typically range from $50 to $400, depending on your vehicle make, model, and local labor rates. Common fixes include: Scan vehicle with a professional-grade OBD2 scanner to read all stored codes and freeze frame data — note the conditions when the code set ($23-119 at shop, free at auto parts store for basic scan); Visually inspect the camshaft position sensor wiring harness and connectors — look for chafed wires, melted insulation, green corrosion, loose pins, or rodent damage (often free to check yourself, $115 diagnostic fee at shop); Test camshaft position sensor with a multimeter at the connector — compare readings to factory service manual specs. If out of spec, replace camshaft position sensor ($50-350).
Will P34BB clear itself?
Related Repair Costs
Explore Repair Costs
Related OBD-II Codes
These codes are in the same range as P34BB and often share similar causes and fixes.
Worried about repair costs?
Get transparent estimates and verify your mechanic's quote before authorizing repairs.
Related Discussions
See what other car owners are saying about this code and related repairs.
View P34BB discussions in the community