P34C5
Serious Severity (Level 4)A Camshaft Position Actuator Control Circuit Driver Current/Temperature Too High Bank 2
P34C5 usually means a Camshaft Position Actuator Control Circuit Driver Current/Temperature Too High Bank 2.
Can you still drive with P34C5?
⚠️Limited driving — get to a repair shop within 1–2 days. Avoid long trips and highway speeds.
Typical repair cost: $50 – $400
Severity Level 4 — Serious
This code indicates a serious issue that can cause noticeable driveability problems and potential engine damage if not addressed. The vehicle should be taken to a mechanic as soon as possible. Extended driving is not recommended.
Common Symptoms
- The camshaft position sensor is not operating as designed
- Warning light or malfunction indicator related to the camshaft position sensor is illuminated
- Check Engine Light illuminated
- Diagnostic trouble code (DTC) stored in module memory
Possible Causes
- Faulty camshaft position sensor — most common cause, test before replacing
- Damaged or corroded wiring/connector in the camshaft position sensor circuit
- Blown fuse or faulty relay for the camshaft position sensor
- Poor ground connection — check and clean all related ground points
- Control module fault — rare but possible, only consider after ruling out simpler causes
Common Fixes
- Scan vehicle with a professional-grade OBD2 scanner to read all stored codes and freeze frame data — note the conditions when the code set ($31-81 at shop, free at auto parts store for basic scan)
- Visually inspect the camshaft position sensor wiring harness and connectors — look for chafed wires, melted insulation, green corrosion, loose pins, or rodent damage (often free to check yourself, $133 diagnostic fee at shop)
- Replace camshaft position sensor if testing confirms it has failed — use OEM quality, avoid the cheapest no-name aftermarket parts that fail in a year ($50-350)
- Check and replace any blown fuses in the camshaft position sensor fuse circuit — if fuse blows again, there's still a short that needs to be found ($2-10 for fuses)
- Perform a wiggle test on the camshaft position sensor wiring harness while monitoring live data — see if the fault returns when you move the harness at different points ($0-122 diagnostic labor)
Estimated Repair Cost
These are estimated costs based on generic repair data. Actual costs may vary depending on your vehicle, location, and labor rates.
Frequently Asked Questions
What does P34C5 mean?
P34C5 stands for "A Camshaft Position Actuator Control Circuit Driver Current/Temperature Too High Bank 2". P34C5 usually means a Camshaft Position Actuator Control Circuit Driver Current/Temperature Too High Bank 2.
Can you drive with P34C5?
Limited driving — get to a repair shop within 1–2 days. Avoid long trips and highway speeds.
How much does it cost to fix P34C5?
Repair costs for P34C5 typically range from $50 to $400, depending on your vehicle make, model, and local labor rates. Common fixes include: Scan vehicle with a professional-grade OBD2 scanner to read all stored codes and freeze frame data — note the conditions when the code set ($31-81 at shop, free at auto parts store for basic scan); Visually inspect the camshaft position sensor wiring harness and connectors — look for chafed wires, melted insulation, green corrosion, loose pins, or rodent damage (often free to check yourself, $133 diagnostic fee at shop); Replace camshaft position sensor if testing confirms it has failed — use OEM quality, avoid the cheapest no-name aftermarket parts that fail in a year ($50-350).
Will P34C5 clear itself?
Related Repair Costs
Explore Repair Costs
Related OBD-II Codes
These codes are in the same range as P34C5 and often share similar causes and fixes.
Worried about repair costs?
Get transparent estimates and verify your mechanic's quote before authorizing repairs.
Related Discussions
See what other car owners are saying about this code and related repairs.
View P34C5 discussions in the community