Harsh Gear Shifts in 2020 Jeep Grand Cherokee
Harsh gear shifts occurring on every shift in a 2020 Jeep Grand Cherokee may be caused by transmission issues, but since the symptom is described as a brake or steering issue, it could also be related to a failing brake booster or steering system component affecting shift quality. However, the most likely cause is a transmission control module (TCM) or valve body problem.
Diagnosis Details
Possible Causes
Transmission control module (TCM) malfunction or software glitch causing harsh shifts.
Low or contaminated transmission fluid leading to improper hydraulic pressure.
Faulty valve body or shift solenoids within the transmission.
Brake booster vacuum leak affecting engine load and shift timing (if symptom is brake-related).
Steering angle sensor or power steering issue causing ECM to alter shift patterns (if symptom is steering-related).
Related OBD-II Codes
Not satisfied with this diagnosis?
Try Another DiagnosisWhat To Do Next
What You Should Do
Check transmission fluid level and condition.
Scan for diagnostic trouble codes (DTCs) using an OBD-II scanner.
Inspect brake booster vacuum lines for leaks.
Test steering angle sensor calibration.
If no codes, consider TCM software update or valve body inspection by a professional.
Share this diagnosis
Help others with similar symptoms
Disclaimer: This AI-generated diagnosis is for informational reference only. Always consult a qualified mechanic for an in-person inspection. AutOwner is not responsible for decisions made based on this information.
